Compostable 10 oz Juice Bottles

10 oz Compostable Juice Bottles from Pure Compostables are produced for cold-pressed juice, smoothie, kombucha, and ready-to-drink beverage brands, built from plant-based PLA. Stocked sizes include 10 oz.

What sets our 10 oz juice bottles apart

In-house pelletizing. We compound and pelletize the PLA bioplastic on-site, so material consistency from batch to batch tracks back to the same line — not a third-party reseller.
Industry-standard neck finishes. 38 mm and 43 mm continuous-thread necks work with flat caps, sport caps, and tamper-evident closures already on most bottling lines.
End-to-end compostability. Bottle and cap are both PLA-based — no mixed-material disposal headache for the consumer or your sustainability report.
Cold-fill stability. Bottles hold structural integrity under standard juice/kombucha cold-fill conditions (up to ~40°C); no slumping, no warp.

Specifications and material breakdown

Stocked sizes: 10 oz
Material: BPI-certified PLA bioplastic (NatureWorks Ingeo grade)
Wall thickness: Calibrated per size (0.6–1.2 mm depending on capacity)
Fill window: Cold-fill only (≤ 40°C); not hot-fill rated
Neck finishes: Standard 38 mm or 43 mm CT; custom necks available on OEM runs
Optical clarity: High-clarity PLA suitable for see-through brand artwork
Shelf life: 12–18 months sealed in cool, dry storage

Who buys our 10 oz juice bottles

Cold-pressed juice brands

Direct-to-consumer juice startups and retail SKUs. Need single-batch dated bottles, custom Pantone-matched labels, and pallet-load logistics. Printed orders typically run from 5,000 units; case-volume ships for retail launches.

Kombucha producers

Small-batch breweries scaling to retail. Bottles handle moderate carbonation pressures, with optional swing-top compatibility for premium-positioned SKUs.

Smoothie & wellness brands

Meal-replacement, post-workout, and functional-beverage brands. Shelf-presence matters — high-clarity PLA pairs cleanly with see-through brand artwork or shrink sleeves.

Beverage distributors & co-packers

B2B buyers reselling to multiple beverage producers. Fulfilled by case, pallet, or container; line-ready standard sizing.

Certifications and compliance

Every SKU on this page is BPI (US), EN 13432 (EU), and ASTM D6400 certified for industrial composting. Material formulations use only plant-derived feedstocks — no PFAS, no oxo-degradables, no fossil-plastic intermediates. Our certificate trail back-references the same factory the products ship from, so procurement and compliance teams can verify chain-of-custody from compounding through finished goods.

Related ranges and sub-categories

This is one branch of the broader Juice Bottles range. Other related sub-categories:

OEM, private label, and bulk orders

Stock SKUs ship by the case from finished-goods inventory; printed and OEM runs go through art-file proofing, plate or digital setup, and quality control before release. Standard MOQ is around 5,000 units for printed orders, with cost efficiency improving steeply at 10,000+ units and full-pallet or container volumes. Lead time is typically 4–6 weeks after artwork approval, plus ocean freight for international shipments.

Frequently asked questions about 10 oz juice bottles

What cap thread sizes are compatible?

Standard 38 mm and 43 mm continuous-thread (CT) finishes work with flat caps, sport caps, and tamper-evident closures. Custom necks (28 mm, 53 mm, swing-top) are available on OEM runs.

Can I use these bottles for hot-fill?

No — PLA softens above ~40°C, so cold-fill (or warm-fill below 40°C) only. For hot-fill applications, contact us about heat-resistant PLA blends and PHA alternatives.

What’s the minimum order quantity?

Stock SKUs ship by the case (typically 100–200 bottles per case). Printed and OEM runs start at 5,000 units; full pallets at 10,000+ units.

Will these compost in a home compost pile?

No — industrial composting only. PLA needs sustained 55–60°C and active microbial activity, conditions home compost piles don’t reach. They are BPI / EN 13432 / ASTM D6400 certified for industrial facilities.

How long is the shelf life?

Sealed empty bottles: 12–18 months in cool, dry storage. Once filled, the contents drive expiry — PLA’s oxygen and moisture barrier compares favorably with conventional PET for most cold-fill beverages.

Do you offer custom labels and print?

Yes — full-color flexo and digital printing, Pantone color-matched. MOQ ~5,000 units, lead time 4–6 weeks after artwork approval. Shrink sleeves supported.

What’s the typical lead time?

Stock SKUs: 1–2 weeks. OEM/printed runs: 4–6 weeks after artwork approval. Full container shipments: 6–8 weeks production plus ocean freight.

For OEM specs, MOQs, lead times, and bulk pricing, visit our wholesale page. For OEM bottle specs and minimum runs, our contact page reaches the team that quotes pellet-grade and tooling. You can also contact our team directly with sample requests or a custom-quote brief.